tampa pool decks logo
sundek logo

The Process in Resurfacing a Pool Deck

You probably clicked on this article thinking that you may DIY pool decking resurfacing. And why not. What if you just got a minor crack on the concrete patio, and you see that you could seal the crack on your own. It saves time, effort, and money from hiring professionals that may overdo a simple fix.

edge pool deck

While you got a reasonable cause for trying DIY resurfacing. Have first an in-depth understanding of how to concrete resurfacing to the pool deck.

Essential Process in Pool Deck Resurfacing

There are essential processes that one follows when resurfacing concrete floors in general. Whether you got pool decks, patios or driveways, even indoor concrete, and whether you need to repair damaged or worn out flooring, there are three primary steps you need to go through.

1. Prepare the Area

There are various resurfacing materials that you would like to have for your pools. And whatever you would use to finish the decks, you must begin the process with preparation.


Prepare the area. Clean and polish the surface. What sounds like a finishing step is what you also need to do at the beginning. Here are standard methods sot use when getting the concrete decks ready or resurfacing:

  • Pressure wash
  • Grinding
  • Polishing
  • Shot blasting

The goal here is to smoothen and then roughen the surface. Smooth the surface to remove all old coatings or residues of hard-to-remove stains and dirt. It may be that old resin coating has existed, so you need to remove everything.

Then provide it with a rough surface to let the new coating adhere effectively.

2. Repair Any Damage

After you clean the surface and have a blank slate in front of you, you will see empty concrete decks or floors. It is so open that you will be able to see even thin, slight cracks, leaks, and creases.

With the emergence of these minor issues and fissures on the slab, a repair must follow. Resurfacing right away will not be effective. Before the significant process, you need to fix and mend minor issues first. Only then can you assure to have an effective resurfacing later.

So, the common ones that you need to resolve are existing cracks. Cracks may be a reinforcement issue. So better perform slab jacking for this first.

There are pool decking issues that resurfacing can not fix. If the cracks turned out to be so severe to repair, then this time, you might want to consider replacing the entire materials. Ultimately you will only know the appropriate fix for the existing concrete pool deck when you get the advice and recommendations of expert pool deck contractors.

swimming pool with foliage

3. Apply the proper resurfacing materials

top view pool deck

There are different treatments used for resurfacing pool decks. So, depending on the type of material you use and the type of pool you got there specifically, you need to know when using the products. The vital tip is to get to see the pool decking material of your choice. It may be a sealer, coloring materials, or overlays.

4. Curing and Sealing

The last process whenever you resurface concrete pool decks is finishing. When applying the final touch on the deck’s surfaces, there are two steps involved.


One is proper curing. Make sure to allow adequate curing. Failure to do this will ruin the whole process. The steps you followed above will be wasted if you hasten the material to adhere and settle on the counter.

Have a pool deck that gets the seal of approval of your client when you protect the surface with concrete coating or poo decks sealants.

Excessive water splashing on the surfaces is a natural part of owning a swimming pool. Finishing the resurfaced pool deck with protective sealers to have lasting durability and quality.

pool deck resurfacing stained
tampa footer logo

Tampa Pool Decks is a proud member of Tampa community. We are committed to create better residential and commercial properties through concrete restoration, masterful craftsmanship, and smart design.

Visit Us
Get in Touch
Scroll to Top